Germany game

While watching the Germany v Australia game on Sunday I was privileged to be able to put one board on the coffee table and start laying sleepers. Little did I know that I was being photographed........

At this point I was looking at an old Mikes Models LSWR buffer stop while waiting for the glue to go off under weighted down sleepers. I could vaguely remember purchasing a buffer stop many years ago but was starting to think I'd lost it. The previous evening, after one last ditched attempt at searching for it, I eventually found it in one of the many boxes of old railway stuff in the roof. In checking out what buffer stops were used at Wenfordbridge and Wadebridge it should be OK for the siding at Tredethy Wharf.

As for the game, Germany seem to be back to their normal tournament best and look to be a hard side to beat. If England get though the group stage lets hope they don't meet Germany in the quarter finals.

Sleeper staining

500 sleepers are now stained and ready for laying.

The last batch laid out to dry

Had a problem with my staining mixture. Ran out of my first mixture and when mixing some more to the same recipe it came out too strong. After a little thinning down, with some more isopropyl alcohol, I think I got close enough. I'm trying to achieve a faded grey/brown colour to the sleepers with that almost silvery look they get when weathered. Hope to post better photos once I start laying the sleepers on the layout.

I'm using Exactoscale 1.6mm thick sleepers hoping I'll get some good variation of depth to the ballast. May well be extravagant and use wooden sleepers even where they will be completely covered by roadways and hard-standing in the Wharf area. Initially I'd purchased some copper clad sleepers for these areas. Now my thoughts are as the hard-standing looks like it was compacted earth, not completely up to rail height, tops of chairs and sleeper edges may well be seen in places.

(Note to self - Staining recipe used for this batch : 100ml water + 100ml isopropyl alcohol + 4ml black ink + 5ml sepia ink - each sleeper individually dipped quickly and shaken)