The 'Man Cave'

Well, the garage conversion is not completely finished. I've still got some alterations to do on the door, lay cork tiles and build a work bench at the door end of the room. But... on Christmas Eve enough carpet tiles were laid for me to start moving stuff into my new hobby room. (or 'Man Cave' as it has become known).

First in was Tredethy Wharf...

What a Christmas present...

When all the Christmas gatherings are over, I'll start transferring everything else into the room, which, after a little decoration, will free up my current hobby room for the start of the new arrival (foster child) in late January.

Happy festive season and best wishes for an enjoyable modelling 2014 to you all.

The Garage (progress report)

I think I'd better come clean....Due to the impending Fostering panel meeting and the thought we may be approved, we drafted in help with this conversion. This has given the project a tremendous kick and we are now well on the way to finishing the room.

Since the last update...

Over a previous weekend we fixed plasterboard to one wall and ceiling leaving me to complete the insulation during weekday evenings.

Garage door end

Rear wall

During the following weekend, while we were away in Edinburgh for a belated break, helping hands plasterboarded the remaining walls and two end walls where skimmed leaving me to complete the roof hatches. During this last weekend the ceiling and two side walls have been skimmed.

Garage door end

A little 'snot' on the floor to clear up when dry

You could say job almost done, but we've been having thoughts about the floor...

Initially I was planning to using gym floor matting, as a covering for the concrete floor, but I've ended up with a couple of sheets of one inch Celotex insulation left over. Rather than discard them we've been thinking how to use them and the floor became a likely spot. Not to add an extra layer of insulation at floor level while the garage is empty would seem to me to be an opportunity missed. So next weekend, the plan is to, screw battens to the floor at 400mm centres with the insulation laid between them, finishing off with 18mm tongue and grooved chipboard floor boarding. Shame I'd not thought of this sooner as I could have laid cable for underfloor heating!

When the floor is in place the electrics can be finished; skirting board installed; architrave added around window, door frame and loft hatches;  the room will then be painted, and a workbench built. Once extra security is installed in the door and possibly some cheap carpet laid, I'll be able to move in and get back to working on Tredethy Wharf.

The Garage (Modelling Room) update

Thought I'd bore you all with what I've been up to in the garage during the last couple of weeks. Rather than trying to verbalise progress, a picture story board might be more interesting...


Stud panelling complete along one side wall


Starting on the other side wall


Tanking slurry finally finished on pillars and around window and door reveals


Late finish last Saturday evening. It's not a garage any more! (Though the side door and window stud wall panels need finishing). Extra noggins have been installed in the end wall to help with the fitting of a work bench.


After a tidy-up the following day, I moved the strip lights onto the end walls ready for fixing plasterboard to the ceiling. (Garage door end)


The garage has not been this empty since I moved in. (Rear wall end)


Wickes had their 100mm Celotex on offer so, a little earlier than planed, I have all the insulation for the walls in the garage. I can work around the inconvenience of the early purchase if it potentially saves me £150.00.


Two side wall stud panels insulated. Installing wall insulation has been brought forward in the project. I thought this was the best place for the Celotex rather that tripping over it while working on the ceiling.

Well that's the current state of play.

Due to the Wickes offer I've got a little ahead of myself as not all stud walls are complete. So the plan for this weekend is to: finish the window stud panel; fix the side door and window stud panels into position, and install the plasterboard ceiling. I'll then continue with insulating the walls during weekday evenings.

If I manage to finish the ceiling by Sunday evening it should start to feel more like a room rather than a garage...

The Garage (The Modelling Room)

As mentioned in a previous post I've been trying to spend time working on converting my garage into a comfortable modelling room. When I discussed my proposal with a builder friend he suggested that I consider using foam (SilverSill Foam) to glue the insulation to the walls and the same foam to glue plasterboard to the insulation. This seemed a very foreign method and, while I was installing extra roofing joists and wiring for new light and ring main, questions that kept running though my head were:

1. What if, in the future, I wanting to hang shelves on the walls? 
2. How strong would the bond be to the wall? 
3. Would damp coming through the walls affect the adhesion of the foam?
4. I was thinking of using 100mm thick insulation for the walls but, because of pillars in the garage, would like to have an air gap between the insulation and wall of about 40mm. Would using foam as glue have a negative affect on this air gap?

All these questions kept haunting me. Irrespective of the follow up conversations and a practical demonstration (in which the foam did glue plasterboard to a mucky piece of timber like 'shit to a blanket') I was never convinced that it was the correct method for me to use. In consulting a different builder friend, while he did not dismiss the method as being outlandish nor incorrect, he thought that a traditional method for lining the walls would be more suitable. So a 100mm x 47mm timber stud frame was discussed as the way forward. Now I can get my head around that...

Part of the garage is beneath ground level. Even though the garage does seem very dry, I've applied Tanking Slurry to these walls to stop water penetration.

Tanking Slurry applied

As I didn't know what I was buying nor how it needed to be applied I only purchased a 20kg bag, which covered about half the the wall area I needed to treat. The best way to describe the solution is as a cement slurry, mixed so that a 4" brush will stand upright in the bucket and applied as thick as possible to the walls. Easy peasy...another bag has been ordered...

First timber frame

While waiting for the extra bag of Tanking Slurry to arrive, I knocked together the first frame. This will have a damp course membrane between the floor and timber floor plate, as well as a vapour barrier stapled to the back between the outside wall and the frame. Installing 100mm Celotex insulation within the frame, should make it a warm, dry room...

What's been happening?

Evening all...I must apologise for the lack of posts during the last few months. I've not been near any blogs or forums for some time so have some catching up to do. I seem to have been very busy but not on the modelling front. Along with trying to earn the daily crust and everyday domestics, we have a couple of projects on the go that are taking a lot of our spare time, more of which later.

A small amount of progress, however, has been made on a few clay wagons. I've also started to look at building some Ratio clay wagon kits by converting them to original 'as built' condition (not with roller bearings as supplied in the kit) as well as doing trials with different materials for tarpaulins for the clay wagons.  I've dropped-in some P4 wheel sets into a number of Bachmann goods wagons, all which was a lot easier than I expected. With the addition of three link couplings I can see that this is a quick way of building a small fleet of reasonably acceptable P4 wagons. In an attempt to improve one of these wagons I've started to repaint and weather a Bachmann LNER 13T steel open wagon that has wooden doors. I'm still trying to gain the skill of representing worn wood. There is a lot more work to be done on this wagon but I feel it's starting to look an improvement on its all over dark grey pristine commercial finish...

LNER 13t steel sided open wagon

A few of the niggles with Tredethy Wharf that came to light during the Cleethorpes show have also been sorted. By using his lathe, Clive has kindly solved the wobbly pony wheels on my 45xx and also milled my storage cassettes to matching pairs. Unfortunately there has been no further progress with the scenics on the little layout.

The two projects that have been eating into our spare time are:
 1) The purchase of the 'run down' house next door with the aim to turn it into a holiday cottage, which has opened up a 'can of worms' dealing with planning and conservation. We are currently still going through the process of developing a business plan to enable us to apply for any grants that might be available. We have also been on numerous free courses on business development. I've not been in a position to write a business plan before so this is a whole new experience.
2) We are going through the motions of becoming respite foster carers, this has been going on for months with many interviews (interrogations) and attending courses. If successful this project is going to have (I hope) a positive affect on the space I will have for my hobbies... as we will need a spare bedroom...

It just so happens that the spare bedroom we have decided to free up is my current study/modelling den. This brings us to the garage... the plan is to turn the garage into a space I can use all year round for my hobbies... with possibly a small area under the stairs in the house where I can keep small projects to be worked on in the evenings without having to be continually 'banished' to the garage.

Empty-ish garage

After a few weeks of sorting the garage (several trips to the tip and charity shops) and moving remaining stuff temporarily into next door it is now just about empty. Over the next few evenings and weekends more ceiling joists will be installed along with cable runs for a ring main and more lighting before fixing the plasterboard ceiling into place, laying insulation between joists and topping off with loft boards for storage. Then it will be onto the walls. It's been a long time since I've done any serious DIY, so progress will be steady but when finished should be an excellent space. I think it's a fair swop, a 23' x 8'10" garage for 7' x 8' bedroom!